Hi Ivan,
Yeah I saw that and installing WinZip 21.5 using command which includes "INSTALLEDP=0" [where I am saying to install WinZip 21.5 with out enterprise data protection].
Note: I am installing WinZip on parent image.
I am not facing any problem using WinZip on individual VM's, but I am facing this issue if I use WinZip on VDI Desktop.
Please let me know if I am missing something.
Thank you,
Vkmr.
Would the same apply if I were to move the Windows Search Index file there as well?
That way each user would have a persistent index that wouldn't constantly rebuild and pin I/O.
Unfortunately the new driver didn't help. I just lost network connectivity again. Again while watching youtube on my Apple TV going through a virtual Sophos UTM. I was able to collect the logging using the commands earlier in this thread. So if you're interested I can upload them. The vmkernel.log reports this at the moment of loss of network connectivity:
2017-05-27T01:23:14.379Z cpu6:142894)NetLB: 2242: Driver claims supporting 0 TX queues, and 0 queues are accepted.
2017-05-27T01:23:14.379Z cpu6:142894)NetLB: 2246: Driver claims supporting 0 RX queues, and 0 queues are accepted.
2017-05-27T01:23:14.380Z cpu6:142894)NetLB: 2242: Driver claims supporting 0 TX queues, and 0 queues are accepted.
2017-05-27T01:23:14.380Z cpu6:142894)NetLB: 2246: Driver claims supporting 0 RX queues, and 0 queues are accepted.
2017-05-27T01:23:14.380Z cpu6:142894)NetLB: 2242: Driver claims supporting 0 TX queues, and 0 queues are accepted.
2017-05-27T01:23:14.380Z cpu6:142894)NetLB: 2246: Driver claims supporting 0 RX queues, and 0 queues are accepted.
2017-05-27T01:23:14.381Z cpu6:142894)NetLB: 2242: Driver claims supporting 0 TX queues, and 0 queues are accepted.
2017-05-27T01:23:14.381Z cpu6:142894)NetLB: 2246: Driver claims supporting 0 RX queues, and 0 queues are accepted.
2017-05-27T01:23:14.382Z cpu6:142894)WARNING: Tcpip_Vmk: 781: vmk_get_gateway failed with error = 0x2d, status = 0xbad0105
2017-05-27T01:23:14.382Z cpu6:142894)WARNING: Tcpip_Vmk: 781: vmk_get_gateway failed with error = 0x2d, status = 0xbad0105
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 129: get connection pkt trace failed with error code 195887136
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 129: get connection pkt trace failed with error code 195887136
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 96: get connection stats failed with error code 195887136
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 129: get connection pkt trace failed with error code 195887136
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 129: get connection pkt trace failed with error code 195887136
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 96: get connection stats failed with error code 195887136
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 129: get connection pkt trace failed with error code 195887136
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 129: get connection pkt trace failed with error code 195887136
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 96: get connection stats failed with error code 195887136
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 129: get connection pkt trace failed with error code 195887136
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 129: get connection pkt trace failed with error code 195887136
2017-05-27T01:23:14.383Z cpu6:142894)Tcpip_Vmk: 96: get connection stats failed with error code 195887136
I have the correct driver installed:
[root@esxi:~] vmkload_mod -s ntg3 | grep Version
Version: 4.1.2.0-1vmw.650.0.0.4598673
I'm running vSphere 6.5 on an HP Proliant DL360p gen8
Franc.
Please take the below example as reference
let say, User1, User2 and User3
user1 had 5 sessions in a week and he spend's 40 hours [8, 8, 8, 8, 8]
user2 had 3 sessions in a week and she spend's 40 hours [8, 8, 24]
user3 had 6 sessions in a week and he spend's 56 hours [16, 8, 8, 8, 12, 4]
Now if I generate report I am seeing as below table [in this report I am getting metrics based on current session, even thou I am saying to sum-up for week].
| User Name | Duration |
|---|---|
| User1 | 8 Hours |
| User2 | 24 Hours |
| User3 | 4 Hours |
I am expecting to see report as below:
| User Name | Duration (used in a week) |
|---|---|
| User1 | 40 hours |
| User2 | 40 hours |
| User3 | 56 hours |
Thank you,
Vkmr.
But, when USB3 and other devices all use SCSI commands and drivers in Linux, I am not convinced that even if the boot drive is set to SATA (because we do not know exactly what part/code in the SCSI vmware drivers is causing this) I'm leery of trusting using other disks plugged in via USB3 passthru, etc.
VMware really needs to acknowledge this so we have an idea of when it will finally be fixed. This is an entire line of OS' with the virtualized SCSI disk driver being corrupted.
I am trying to connect with VMware vSphere Client 6.0 and I am getting this error.
I am a college student and I am connecting from home with Juno Pulse VPN. I am using Windows 10
and I have checked the proxy and firewall settings and nothing is blocking the connection. I am new to VMware
and don't know much about it, I am trying to connect to the host at the college. I'm not sure what other information I can give to possibly resolve this. Thanks in advance.
I"d like to storage vmotion vms with move-vm and then if there are any errors, put them in an email and email them to me
get-vm | %{
move-vm -datastore datastore100
}
If one VM fails I don't want to abort the whole script, just catch whatever the error was on that one vm and email it to myself and go to the next one. Is this possible?
NSX U/DLR appliance tidbits | SOSTech
tl;dr:
Deploy if you need dynamic routing on your DLR
Enable HA and add an IP address on a dedicated logical switch
Pick Universal if you'll eventually have cross-vcenter and will only connect to logical switches (no dPGs)
I have a Wacom Bamboo but don't have that sort of issue with either Fusion on MacBook Pro or Workstation on Windows.
I would suspect it is hardware and/or cabling issue. You don't say how/where you connect the USB cable from the Intuos. I would suggest to try changing the USB port used for the Intuos. I don't know if the USB cable is detachable with Intuos. I have had to replace the USB cable of the Wacom Bamboo once before (this was detachable) when the connection would be intermittently be lost.
Slightly off topic, with AutoCAD and Revit, you might want to consider using something like 3Dconnexion Space Mouse as well.
I have created a VM and loaded an OS on it and want to make it my template to clone. I have copied the .vmx and .vmdk files to a new folder but I would like to change the name of the files. I understand vCLI might be needed. I installed that but don't know where to go from there.
Any ideas or advice appreciated.
Thank you
Hello experts,
We have FreeBSD vm on esx 6.0 (the base OS revision) with vmxnet3 as one of the interfaces on top of a vswitch. Jumbo MTU is not enabled on the vswitch. In our guest driver, we find eop field set indicating buffers active in jumbo ring with qid=8. We are running with 8 vRSS queues. We allocate buffers in jumbo ring even when jumbo MTU is not enabled. Could that be a problem?
Since backend is setting eop field incorrectly, we end up chaining packets incorrectly causing our protocol to go haywire.
Are there any known issues around this area?
We run a user space poll mode driver similar to DPDK.
Regards,
Nirmal
I recently tried upgrading my host from 6.0 to 6.5 and everything seemed to go fine. However, after rebooting at hangs while running rc scripts. When looking at the logs I am receiving an error over and over:
"WARNING: NFS: 221: Got error 2 from mount call"
I also attached a screenshot to show the logs. This seems to be related to NFS but I don't have any storage using NFS so I'm not sure what the issue is.
Any help would be much appreciated.
Thanks,
Tony
I am getting this error since last day while trying to log in Vcentre web client. Since last day morning it was working fine. I have not made any changes yet in any virtual machines. I cant understand how to solve this issue. Please help. The error picture is attached.
Yes I got the same page that you mentioned below. After that when I press f2 also i tried to press space bar key .After some time the same page turned with black backgroud,without any change .Please help me out with this .Please view the error page again
Hi...
yes, the hardware compatibility is at 12...
attached a screen shot, this occurs in a loop after a few seconds the machine is started..
attached the dxdiag and vmx and log files
in the dxdiag I have seen the system is set to 120 DPI, this is not correct, it is definitly at 100%...
but the vmtools try to set the (w7) machine also to 120 DPI, under XP and W10 they do not
Regards, Kai
Try something like this
$Failed= @()
foreach($vminGet-VM){
Try{
Move-VM-VM$vm-Datastoredatastore100-ErrorActionSilentlyContinue
}
Catch{
$failed+=$vm.Name
}
}
if($Failed){
$sMail= @{
To ='lucd@lucd.info'
From ='lucd@lucd.info'
Subject ='Failed svMotion'
SmtpServer ='mail.lucd.info'
BodyAsHtml =$true
Body = ($Failed|ConvertTo-Html|Out-String)
}
Send-MailMessage@sMail
}
This error doesn't give a lot of clues.
Check the vpxd logs to see if they contain some more information on the error
Try something like this
foreach($vminGet-VM){
$obj=[ordered]@{
Name =$vm.Name
MemoryGB =$vm.MemoryGB
GuestOS =$vm.ExtensionData.Guest.guestFullName
}
$i=1
Get-HardDisk-VM$vm|%{
$obj.Add("HD$($i)Name",$_.Name)
$obj.Add("HD$($i)Type",$_.StorageFormat)
$i++
}
New-ObjectPSObject-Property$obj
}
Hi bluefirestorm
After booting the host, I verify that the authorisation service is running.
I start the VMware GUI. When I start a VM, the UAC prompt displays.
If I shut down the VM (cleanly through the guest shutdown), but leave the VMware GUI process around, starting the VM again does not require the UAC prompt.
However, if I close the GUI process, restart it and attempt to start a VM, the UAC prompt appears again.
I wonder if there might be some clue in a VMware log file.
Any other pointers appreciated!
Cheers
Ronny
This problem is plaguing us on VDIs with nVidia 3D acceleration-- would LOVE to find out the offending process(es) or GPOs.
Appreciate any feedback from the community.